NAVIGATION


NAVpilot-711C

AUTOPILOT

Kick back, relax and let NAVpilot steer you to the destination!

FURUNO's NAVpilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course keeping capability, dynamically adjusting essential parameters for navigation i.e., vessel speed, trim, draught, tide and wind effects, dead band, weather, etc. These parameters are stored in the system memory and continuously optimized.

Recreational Boats
NavNet Connect SABIKI mode Fantum Feedback Volvo Penta IPS Compatible   CAN bus 

Features

  • Perfect for inboard or outboard power boats and sail boats

  • Compatible with EVC systems

    The NAVpilot series have the capability to work with Volvo Penta IPS, Yamaha Helm MasterTM, Yanmar 8LV engine systems and Seastar Optimus360 Joystick system.


    Volvo Penta IPS system*
    (compatible with Volvo Penta IPS drive versions C, D or E type)



    Yamaha Helm MasterTM system*


    Seastar Optimus360 Joystick system**


    Yanmar VC10 System**
    (compatible with Yanmar 8VL and JC10)

    *Requires the optional IF-700IPS for the NAVpilot-700/711C
    ** Requires the optional IF-NMEA2000 for the NAVpilot-700/711C
  • Introducing “SABIKI mode” for the NAVpilot-711C

  • With the brand new SABIKI mode your NAVpilot-711C has just become even more capable than before. SABIKI mode lets the autopilot take control while you are drifting astern, so you can focus on fishing instead of steering. Moving astern at a slow pace the SABIKI mode is uniquely tailored for sabiki fishing, jigging and bottom fishing.

    SABIKI mode is only available on vessels with outboard engines.

  • Furuno Fantum Feedback - allows for no physical rudder feedback unit for a streamlined installation and precise course control

    Furuno's all-new "Fantum Feedback" NAVpilot software clears the path to a simplied installation, while also delivering enhanced steering control. With Fantum Feedback, NAVpilot outboard installations no longer require use of a physical rudder feedback unit.

    Fantum Feedback is a menu-selectable feature available in the latest NAVpilot-700 series software. This new software was developed and extensively tested on a wide variety of outboard vessels with hydraulic steering and reversing pump control. Fantum Feedback achieves precise course control, from slow trolling speeds to high-speed cruising, utilizing a newly developed gain process, rather
    than traditional rudder angle based control.
  • Simplified activation set-up by on-screen wizard

  • Optional revolutionary SAFE HELM and POWER ASSIST brings unrivaled steering control and comfort at the helm*

    <SAFE HELM>
    The SAFE HELM temporarily switches the NAVpilot to manual steering for a specied time interval, taking it out of an automatic steering mode (AUTO, NAV, etc.) After the time interval has elapsed, SAFE HELM is deactivated and the previous automatic steering mode is restored.
    <POWER ASSIST>
    The POWER ASSIST is a unique helm-activated assisted steering feature that can augment and possibly replace separate electric and power-robbing, engine-driven power steering systems on many vessels. POWER ASSIST reduces steering system complexity and costs while increasing economy.

    * Required Options - HRP11 or HRP17 Pump and FPS8 Power Steering
  • Utilizes a self-learning and adaptive software algorithm

    From the rst dock-side setup through the last voyage you made, NAVpilot continues to learn your vessel's steering characteristics. This allows dynamic adjustments to the boat's steering for vessel speed, trim, draft, tide and wind effects, weather, etc. These characteristics are stored in the processor's memory where they are continuously optimized to make the NAVpilot more versatile.
  • Selectable "Economy" and "Precision" Navigation Modes combine adaptive technology providing fuel and power savings of up to 2.5% or more.**

    ** Based on Furuno testing and "Scenarios for a Clean Energy Future 2000” - U.S. Department of Energy (www.ornl.gov/sci/eere/cef)
  • "Precision" XTE accuracy: within 0.003 nm

  • Bright & Clear Display

    Various display modes are available, allowing you to customize the data to suit your own preferences with either digital or analog graphics.

    The new NAVpilot-711C features a color day/night graphic display, giving you much better sunlight viewability during the day, while not affecting your night vision when the sun goes down.
  • Simple one-touch mode selection enables flexible steering and course control

    Furuno's new NAVpilot series is designed to match the NavNet TZtouch, NavNet 3D, FI-50 Instrument series and other navigation equipment. The “Plug and Play” CAN bus interface allows for easy installation and exceptional interface ability. The diagrams below show typical installations for power and sail boats.
  • Defferent mode variations

  • FishHunter

    The NAVpilot will activate the FishHunter to perform square, zigzag, circle, orbit, spiral or gure eight maneuvers around the specied target at a user selected distance. This feature can also be used for Man Overboard (MOB).

  • Volvo Penta IPS compatibility

Specifications

CONTROL UNIT

Display
4.1" Color LCD
Effective Display Area
82.6 (W) x 61.9 (H) mm
Pixel Number
320 x 240
Backlight
8 steps

PROCESSOR UNIT

Steering modes
STBY, Auto, Dodge, Turn, Remote, Advanced auto*, Navigation*, Wind*, Fish Hunter™*

* external data required
Sea Condition Adjustment
AUTO/MANUAL-CALM/MODERATE/ROUGH
Rudder Angle Settings
10 - 45 deg
Alarm
Heading deviation, Cross-track error*, Ship's speed*, Depth*, Water temperature*, Wind*, Watch, Log trip*

* external data required

INTERFACE

Ports
CAN bus (NMEA2000): 1, NMEA0183: 2
Input
AAM, APB, BOD, BWC, BWR, DBT, DPT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWV, ROT, RMB, RMC, THS, TLL, VHW, VTG, VWR, VWT, XTE, ZDA
Input (CAN bus)
059392/904, 060928, 061184, 126208/720/992/996, 127250/251/258/488/489, 128259/267, 129025/026/029/033/283/284/285, 130306/310/311/312/313/314/577/818/821/827/880
Output
DBT, DPT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWV, RMB, RMC, ROT, RSA, VHW, VTG, VWR, VWT, ZDA
Output (CAN bus)
059392/904, 060928, 061184, 126208/464/720/992/996, 127237/245/250/251/258, 128259/267, 129025/026/029/033/283/284/285/827, 130306/310/311/312/822/823

WATERPROOFING

Processor Unit
IPX0
Control Unit
IP56
Other unit
IPX5

OTHERS

Power Supply
12-24 VDC: 4.0 - 2.0 A (excluding pump)
Size
115 (H) x 115 (W) x 73 (D)
Weight
0.33 kg

Interconnection Diagram

Equipment List

Standard

  • CONTROL UNITFAP-7011C
  • PROCESSOR UNITFAP-7002
  • RUDDER REFERENCE UNITFAP-6112
    WITH 20M CABLE
  • 15M CABLE BD-07AFFM-LR-150 BETWEEN PROCESSOR UNIT AND CONTROL UNIT
  • TERMINATOR BD-07AFFM-LR7001
  • OthersSTANDARD SPARE PARTS, INSTALLATION MATERIALS, ACCESSORIES AND MANUALS

Option

  • CABLE ASSY10 M
    15 M
    20 M
  • TERMINATOR
  • NMEA2000 HEAVY CABLE ASSY1 M
    2 M
    6 M
  • REMOTE CONTROLLER
    FAP-5551-E/5552-E (DIAL)
    FAP-6211-E/6212-E (BUTTON)
    FAP-6221-3/6222-E (LEVER)
    FAP-6231-DE/6232-E (DODGE)
  • DISTRIBUTION BOXFAP-6800
  • CONTROL UNIT (1 DIN)FAP-7011C-E-A
  • JUNCTION BOXFAP-7822
    FI-5002
  • TERMINATION RESISTOR (MICRO)FEMALE
    MALE
  • TERMINATION RESISTOR (MINI)FEMALE
    MALE
  • NMEA2000 LIGHT CABLE ASSY1 M
    2 M
    6 M
  • MINI/MICRO T-CONNECTORNMEA
  • HANGERFAP-5551/5552
  • FLUSH MOUNT KITFAP-6221/6222/FAP-6501
  • T-CONNECTOR (MICRO)FOR LIGHT
  • VOLVO IF KITFAP-6300
  • IPS INTERFACE UNITIF-700IPS
  • VOLVO IPS GATEWAY AUTOPILOT-GATEWAYP-000583